Labor Day weekend seemed a fine time to begin laboring over my small jumbo commission...here's a photo or two...
Larry
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Larry’s SJ is birthin’! http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3090 |
Page 1 of 1 |
| Author: | L. Presnall [ Fri Sep 02, 2005 11:45 am ] |
| Post subject: | |
Labor Day weekend seemed a fine time to begin laboring over my small jumbo commission...here's a photo or two... Larry
|
|
| Author: | chipspencer [ Fri Sep 02, 2005 12:07 pm ] |
| Post subject: | |
That's gonna be a beauty Larry. Absolutely wonderful work. Can't wait to see it finished. chip |
|
| Author: | L. Presnall [ Fri Sep 02, 2005 12:27 pm ] |
| Post subject: | |
Me too Chip!  It's a Lefty, so setup's gonna be interesting for me...but at least I won't get all teary letting it go!
Happy Labor Day! Larry |
|
| Author: | Darin Spayd [ Fri Sep 02, 2005 12:39 pm ] |
| Post subject: | |
For a second, as the first pic came up, I thought I was looking at the peghead. That chair has a nice shape to it......so does the guitar! 
|
|
| Author: | John Mayes [ Fri Sep 02, 2005 12:58 pm ] |
| Post subject: | |
my guess, from the angles of your braces, is that this guy will have a crisp, balanced, cutting tone. Sweet job Larry! |
|
| Author: | L. Presnall [ Fri Sep 02, 2005 1:10 pm ] |
| Post subject: | |
Darin, I hope John's right and it sounds more like a guitar than a chair!  (If it turns out a third as well as the ones I saw in John's shop I'll be a happy man! 
|
|
| Author: | BruceH [ Fri Sep 02, 2005 1:19 pm ] |
| Post subject: | |
I like it, Larry. What is this - number 8? We want to see pics of 9 through 16 also
|
|
| Author: | L. Presnall [ Fri Sep 02, 2005 1:52 pm ] |
| Post subject: | |
Bruce, 9-16 may be a while in actuality...but, the ARE in the planning stages I just have to find their owners! The photo guy says 5-7 should be post-able this next week.
|
|
| Author: | BlueSpirit [ Fri Sep 02, 2005 5:00 pm ] |
| Post subject: | |
Very Nice work, Larry. WOW! |
|
| Author: | Tim McKnight [ Sat Sep 03, 2005 11:32 am ] |
| Post subject: | |
Larry: You have a PM. |
|
| Author: | L. Presnall [ Sat Sep 03, 2005 11:54 am ] |
| Post subject: | |
Terry, the top is at .115 in the middle, thinning just a hair out to the edges south of the soundhole...the bridge plate is 2 5/8" wide (north to south) and pretty much the same size as the plans...when I drew the bridge out on the top the E's looked okay...I sure don't need another surprise at this point tho!
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|